Description

Design

The Yantar-P radiation portal monitors consist of pillars mounted opposite each other at the search area boundaries. The pillars contain gamma and neutron detectors, and electronics units. The radiation monitors are equipped with sound and light alarming devices, as well as performance status indicators.

Lead shields used for gamma detectors serve to enhance gamma detection efficiency.

Occupancy sensors are used to detect presence of the object in the search area. Depending on the model and operating conditions, the Yantar-P monitors can come with either compact radar, infrared or optical sensors.

The radiation monitors transfer data to the control panel or a PC with the application specific software installed.

The Yantar-P series also includes models that can be installed outdoors.

The choice of a specific Yantar-P model as well as agreement of customized solutions including single-pillar versions, is made in accordance with installation site conditions and customer’s requirements to the minimum detected quantities of radioactive and nuclear materials.

Values in Specification section are valid for the Yantar-2P dual-pillar radiation monitor with gamma and neutron channels.

Typical application:

As part of Radiation Monitoring Integrated Systems
As part of Integrated Safety Systems

When operating as part of the Integrated System, the radiation monitor can be equipped with a video camera to record alarms.

Key features

• Operating mode – continuous, automatic
• Sound and visual alarms
• Settable thresholds for each detection channel
• Possibilities of expansion and connection of external devices
• Generation of “dry contact” in case of an alarm event
• Automatic registration of events in a non-volatile archive
• Storage and output of archive data to external devices (when connected)
• Embedded automatic selftest system
• Access to the system parameters via RS-485 interface (optional Ethernet)
• Generation of video information on the target object (when video surveillance sets are connected)
• Service life is 12 years

Associated equipment

• PVC-01 Control Panel – used to set up the Yantar radiation monitor parameters and display results
• MKC-A03 Handheld radiation monitor – used to search for and localize, identify and measure the detected ionizing radiation source dose rate
• Equipment of the radiation monitoring integrated system:
  • Video monitoring set – video recording of the alarming object
  • Data acquisition and processing equipment – acquisition and processing of data, logging of alarm events
  • Operator’s Workstation – data input, display of current and logged data
  • Networking wallbox – connection of the RPM and video monitoring sets to the radiation monitoring integrated system